| Manufacturer | Ford, Kaiser, AM General |
|---|---|
| Production | > 100,000 (1959 - 1982) |
| Predecessor | M38 & M38A1 |
| Successor | AM General HMMWV |
| Class | 1/4 ton truck, four wheel drive |
| Engine(s) | 4-cyl., 141,5 cu.in (2,320 cc) 71 hp (52 kW) at 4000 rpm / 128 ft·lbf (173 Nm) at 1800 rpm |
| Transmission(s) | 4-speed + reverse transfer case only to engage / disengage front wheel drive |
| Wheelbase | 85 inch / 216 cm |
| Length | 133 inch / 338 cm |
| Width | 64 inch / 163 cm |
| Height | 71 inch (180 cm) with top up reducible to 53 inch (135 cm) |
| Curb weight | 2,400 lb (~1070 kg) |
| Related | M422 'Mighty Mite' contemporary |
The M151 MUTT was the successor to the Korean War M38 and M38A1 jeep Light Utility Vehicles and was produced from 1959 through 1982. With some M151A2-units still in US Military service in 1999, the M151-series has achieved a longer run of service than that of the WW2 MB/GPW, M38 and M38A1 series combined. M151 drivetrains are still being manufactured into vehicles by Carolina Growler. However, the Light Strike Vehicle designed for the V-22 Osprey transport by American Growler is an all new design and uses all new parts and does not contain any M151 parts or design elements.
Contents |
In 1951 Ford Motor Company gained the contract to design a 1/4 ton 4x4 Military Utility Tactical Truck (hence MUTT) to replace the Korean War jeeps, the M38 and M38A1. The M151 'MUTT' was developed with guidance from the US Army's Ordnance Truck Automotive Command. Design work began in 1951 and testing and prototyping lasted through most of the fifties. Although the M151 was developed and initially produced by Ford, production contracts for the M151A2 were later also awarded to Kaiser Jeep and AM General Corp.
Although the M151 closely resembled its predecessors externally, retaining mostly the same basic layout and dimensions - for all intents and purposes it was a completely new design. Unlike previous jeep designs, whose structure consisted of a steel tub bolted onto a separate steel frame, the M151 utilized a unitized monocoque, which integrated the box frame rails into the sheet-steel body-structure. Eliminating the separate frame gave the M151 slightly more ground clearance, while at the same time lowering the center of gravity. This process slightly enlarged the vehicle, making it roomier than previous jeep designs, while retaining the same light weight.
Another area improved upon in the M151 was suspension design. Dispensing with the rigid live axles in the front and rear that all previous military jeeps (a layout still used on modern day Jeeps, such as the Jeep CJ and Wrangler), the M151 was instead equipped with independent suspension and coil springs. This made it capable of high-speed, cross-country travel, while boasting high maneuverability and agility. The new suspension also had the added benefit of providing a more comfortable ride.
Due to copyright and trademark issues, the M151 did not feature Jeep's distinctive seven vertical slot grille, instead, a horizontal grille was used.
Unlike some other military transports, such as the Humvee or Jeep, the M151 was never widely released into the civilian market. This was partly because it did not meet Federal highway safety standards for civilian vehicles, and also because of a series of early rollover accidents. While these were often blamed on the independent suspension (which played no small part), they were also due to driver errors, operators unprepared for the increased performance, compared to the Jeeps which it replaced. At high speed, the rear suspension in an empty MUTT would begin to "float" on the coil springs; a turn made to the left could cause the right rear wheel to bounce, causing handling problems. The vehicle's tendency to when there was weight in the rear, so drivers would often place an ammunition box filled with sand under the rear seat, when no other load was being carried. The box could simply be emptied (or abandoned) when the extra weight was not needed.
The handling issues were eventually resolved by a redesign of the rear suspension, introduced in the M151A2 model. However, due to liability concerns, the US Department of Defense deemed all M151 series vehicles "unsafe for public highway use", limiting their public use.
First put into service in Vietnam, the MUTT played an active part in American military operations well into the 1980s, when it was phased out in favor of the Humvee. Despite it's official replacement, the M151 had some distinct advantages over its much larger and heavier successor, like being small enough to fit inside a C-130 cargo plane or CH-53 heavy transport helicopter. This flexibility was one of the reasons the US Marine Corps deployed M151 FAV (Fast Attack Vehicle) variants through 1999, in places like Kosovo.
Various models of the M-151 have seen successful military service in 15 different NATO countries and M151s were sold to many countries, including Canada, Denmark, Lebanon, Israel, the Philippines and the United Kingdom. Currently, the M151 is used by over 100 countries worldwide.
Carolina Growler designs and sells a line of Light Utility Vehicles based on the M151 drivetrain. The Light Strike Vehicle which was reduced in size to fit into the V-22 Osprey tiltrotor transport is all new design and contains no M151 parts or design elements.
No comments have been added.