Tire code

All you want to know about Tire code

Tire code or Tyre code - Automobile tires are described by an alphanumeric code, which is generally molded into the sidewall of the tire. This code specifies the dimensions of the tire, and some of its key limitations, such as load bearing ability, and maximum speed. Sometimes the inner sidewall contains information not included on the outer sidewall, and vice versa.

The code has grown in complexity over the years, as is evident from the mix of metric and imperial units, and ad-hoc extensions to lettering and numbering schemes. New automotive tires frequently have ratings for traction, treadwear, and temperature resistance (collectively known as The Uniform Tire Quality Grade (UTQG) ratings).

Most tires sizes are given using the ISO Metric sizing system. However some pickup trucks, and SUVs use the Light Truck Numeric or Light Truck High Flotation system.

Contents

Explanation of tire codes

Two major standardizing organizations are the European Tyre and Rim Technical Organization (ETRTO) and the U. S. Tire and Rim Association (T&RA).

Tire identification diagram
Tire identification diagram
Tire identification diagram, light truck specific features
Tire identification diagram, light truck specific features

The ISO Metric tire code consists of a string of letters and numbers, as follows:

  • An optional letter (or letters) indicating the intended use or vehicle class for the tire:
    • P: Passenger Car
    • LT: Light Truck
    • ST: Special Trailer
    • T: Temporary (restricted usage for "Space-Saver" spare wheels)
  • 3 digit number: The "nominal section width" of the tire in millimeters, from sidewall edge to sidewall edge
  • /: Slash character
  • 2 digit number: The "aspect ratio" of the sidewall height to the total width of the tire, as a percentage. If this is missing, it is assumed to be 82%. If the number is larger than 200, then this is the diameter of the entire tire in millimeters.
  • Construction of the fabric carcass of the tire:
    • B: bias belt
    • D: diagonal
    • R: radial
      • if missing, then it is a cross ply tire
  • 2 digit number: Diameter in inches of the wheel that the tire is designed to fit
  • 2 or 3 digit number: Load index; see table below
  • 1 or 2 digit/letter combo: Speed rating; see table below
  • Additional marks: See subheading below.

Light Trucks

Some light truck tires follow the Light Truck Numeric or Light Truck High Flotation systems, indicated by the letters LT at the end instead of the beginning of the sequence, as follows:

  • The tire diameter is given for High Flotation tires and omitted from Numeric tires.
    • 2 digit number: The diameter of the tire in inches.
    • x: Separator character.
  • 3 or 4 digit number: The section width (cross section) of the tire in inches. If the tire diameter is not given, section widths ending in zero (e.g., 7.00 or 10.50) indicate the aspect ratio is 92%, while section widths not ending in zero (e.g., 7.05 or 10.55) indicate the aspect ratio is 82%.
  • Construction of the fabric of the tire:
    • B: bias belt
    • D: diagonal
    • R: radial
  • 2 digit number: Diameter in inches of the rim that this tire is designed to fit.
  • LT: Designates that this is a Light Truck tire.
  • Load index and speed rating are not required for this type of tire but may be provided by the manufacturer.
    • 2 or 3 digit number: Load index; see table below.
    • 1 or 2 digit/letter combo: Speed rating; see table below.
  • Additional marks: See subheading below.

Load Range

Load range on light truck tires indicates ply rating and load pressure (PSI).

Load Range [1]
Load Range Ply Rating Load Pressure (PSI)
B 4 35
C 6 50
D 8 65
E 10 80
F 12 95

Load Index

The load index on a passenger car tire is a numerical code stipulating the maximum load (mass, or weight) each tire can carry.

Load Index (E.T.R.T.O. 1991 - Section 13)[citation needed]
Code Pounds Kilograms Code Pounds Kilograms Code Pounds Kilograms Code Pounds Kilograms
60 551 250 80 992 450 100 1,764 800 120 3,087 1,400
61 567 257 81 1,019 462 101 1,819 825 121 3,197 1,450
62 584 265 82 1,047 475 102 1,874 850 122 3,306 1,500
63 600 272 83 1,074 487 103 1,929 875 123 3,418 1,550
64 167 280 84 1,102 500 104 1,984 900 124 3,528 1,600
65 640 290 85 1,135 515 105 2,039 925 125 3,638 1,650
66 661 300 86 1,168 530 106 2,094 950
67 677 307 87 1,201 545 107 2,149 975
68 695 315 88 1,235 560 108 2,205 1,000
69 717 325 89 1,279 580 109 2,271 1,030
70 738 335 90 1,323 600 110 2,337 1,060
71 761 345 91 1,356 615 111 2,403 1,090
72 783 355 92 1,389 630 112 2,470 1,120
73 805 365 93 1,433 650 113 2,536 1,150
74 827 375 94 1,477 670 114 2,601 1,180
75 853 387 95 1,521 690 115 2,679 1,215
76 882 400 96 1,565 710 116 2,756 1,250
77 908 412 97 1,609 730 117 2,833 1,285
78 937 425 98 1,653 750 118 2,910 1,320
79 963 437 99 1,709 775 119 2,999 1,360

Speed rating

The code is made up of one or two letters, or one letter and one number. It indicates the maximum permitted speed that the tire can sustain for a ten minute endurance without being in danger[citation needed].

Speed rating[citation needed]
Code mph km/h Code mph km/h
A1 3 5 L 75 120
A2 6 10 M 81 130
A3 9 15 N 87 140
A4 12 20 P 94 150
A5 16 25 Q 100 160
A6 19 30 R 106 170
A7 22 35 S 112 180
A8 25 40 T 118 190
B 31 50 U 124 200
C 37 60 H 130 210
D 40 65 V 149 240
E 43 70 Z over 149 over 240
F 50 80 W 168 270
G 56 90 (W) over 168 over 270
J 62 100 Y 186 300
K 68 110 (Y) over 186 over 300

Prior to 1991, tire speed ratings were shown inside the tire size, before the "R" character. The available codes were SR (112 mph, 180 km/h), HR (130 mph, 210 km/h), VR (in excess of 130 mph, 210 km/h) and ZR (in excess of 149 mph, 240 km/h). The ZR code is still in common use, often combined with a W or Y speed code.

Tires with a speed rating higher than 186 mph (300 km/h) are indicated by a Y in parenthesis[citation needed]. The load rating is often included within the parenthesis, e.g. (86Y).

In many countries, the law requires that tires must be specified, and fitted, to exceed the maximum speed of the vehicle they are mounted on, with regards to their speed rating code (except for "Temporary Use" spare tires). In Germany, tires that are not fit for a car's or motorcycle's particular maximum speed are illegal to mount, unless a warning sticker stating the allowed maximum speed is placed within clear sight of the driver inside the vehicle. Some manufacturers will install a speed governor if a vehicle is ordered with tires rated below the vehicle's maximum speed.

If a tire is replaced with a lower speed rating than originally specified by the vehicle manufacturer, then this may render the vehicle insurance invalid.

Additional marks

There are numerous other markings on a typical tire, these may include:

  • M+S, or M&S: Mud and Snow; winter/all-weather tires, with above-average traction in muddy or snowy conditions, and for low ambient temperatures. Spike tires have an additional letter, "E" (M+SE).
  • BSW: Black SideWall
  • WSW: White SideWall
  • OWL: Outline White Lettering
  • E4: Tire approved according ECE-regulations, the number indicating the country of approval.
  • 030908: Approval number of the tire
  • DOT code: All tires for use in the USA have the DOT code, as required by the Department of Transportation (DOT). It specifies the company, factory, mold, batch, and date of production (2 digits for week of the year plus 2 digits for year; or 2 digits for week of the year plus 1 digit for year for tires made prior to 2000)
  • TL: Tubeless
  • TT: Tube-type, tire must be used with an inner-tube
  • Made in ...: Country of production
  • C: Commercial; tires for light trucks (Example: 185 R14 C)
  • B: Bias belted; tires for motorcycles (Example: 150/70 B 17 69 H)—diagonal construction with belt added under the tread
  • SFI, or Inner: Side Facing Inwards; inside of asymmetric tires
  • SFO, or Outer: Side Facing Outwards; outside of asymmetric tires
  • TWI: Tread Wear Indicator; a device, such as a triangle or a small Michelin Man icon, located where the tread meets the sidewall. It indicates the location of the raised wear bars in between the tire tread channels.
  • SL: Standard Load; tire for normal usage and loads
  • XL: eXtra Load; tire for vehicles of heavier standard weights
  • RF: Reinforced tires
  • Arrows: Some tread designs are "directional", and designed to perform better when driven in a specific direction (clockwise or counter-clockwise). Such tires will have an arrow showing which way the tire should rotate when the vehicle is moving forwards. It is important not to put a "clockwise" tire on the left hand side of the car or a "counter-clockwise" tire on the right side.
  • M0: Original tires for Mercedes-Benz
  • N*: Original tires for Porsche
  • To facilitate proper balancing, most high performance tire manufacturers place laso red (uniformity) and yellow (weight) dots - marks on the sidewalls of its tires to enable the best possible match-mounting of the tire/wheel assembly.[2]

Tire geometry

When referring to the purely geometrical data, a shortened form of the full notation is used. To take a common example, 195/55R16 would mean that the nominal width of the tire is approximately 195 mm at the widest point, the height of the side-wall of the tire is 55% of the width (107 mm in this example) and that the tire fits 16 inch diameter wheels. The code gives a direct calculation of diameter.

Less commonly used in the USA and Europe (but often in Japan for example) is a notation that indicates the full tire diameter instead of the side-wall height. To take the same example, a 16 inch wheel would have a diameter of 406 mm. Adding twice the tire height (2×107 mm) makes a total 620 mm tire diameter. Hence, a 195/55R16 tire might alternatively be labelled 195/620R16.

Whilst this is theoretically ambiguous, in practice these two notations may easily be distinguished because the height of the side-wall of an automotive tire is typically much less than the width. Hence when the height is expressed as a percentage of the width, it is almost always less than 100% (and certainly less than 200%). Conversely, vehicle tire diameters are always larger than 200 mm. Therefore, if the second number is more than 200, then it is almost certain the Japanese notation is being used—if it is less than 200 then the U.S./European notation is being used.

Examples

The tires on a Mini Cooper might be labeled: P195/55R16 85H

  • P — these tires are for a passenger vehicle
  • 195 — the nominal width of the tire is approximately 195 mm at the widest point
  • 55 — indicates that the height of the side-wall of the tire is 55% of the width (107 mm)
  • R — this is a radial tire
  • 16 — this tire fits 16 inch diameter wheels
  • 85 — the load index, a maximum of 515 kg per tire in this case
  • H — the speed index, this means the maximum permitted speed, here 210 km/h (130 mph).

The tires on a Hummer H1 might be labeled: 37X12.5R17LT

  • 37 - the tire is 37 inches in diameter
  • 12.5 - the tire has a cross section of 12.5 inches
  • R - this is a radial tire
  • 17 - this tire fits 17 inch diameter wheels
  • LT - this is a light truck tire.

Tractor tires

The numeric codes on tractor tires since 1955 have required either two or three numbers: W-D or H/W-D where 'W' is the width of the tire in inches, D is the diameter of the rim in inches and H (if provided) is the percentage height of the tire. Hence, 5.00-15 is a tire that will fit a 15 inch diameter rim and is 5 inches wide but of indeterminate height. 25/5-16 is a tire that has a 5 inch width, fits a 16 inch diameter rim and whose height is 25% of the width.[3]

References

  1. ^ "Load Range/Ply Rating Identification". Retrieved on 2008-08-16.
  2. ^ "Understanding Your Tires—Match Mounting", Yokohama Tire Corporation.
  3. ^ "FAQ's". Retrieved on 2008-01-16.

See also

External links

Retrieved from "http://en.wikipedia.org/wiki/Tire_code"

No comments have been added.



Your name:

City:

Country:

Your comments:

Security check *
(Please enter the number into adjoining box)

 

  • Ads

           
eXTReMe Tracker